Formsprag Clutch®
CL40853-67

General purpose, ball-bearing clutches suitable for overrunning, backstopping and light to medium-duty indexing applications. They are oil lubricated and equipped with lip type seals. Grease is available. Increased speeds are possible with steel labyrinth seals.

Formsprag Clutch® Formchrome® Sprag Clutch, Series: FS-900, 4-1/4 in Bore, 12 in OD, 6.38 in Overall Length, 18000 ft-lb Torque, 700 rpm Inner/500 rpm Outer Race Maximum, Vertical (Zero-U) Mounting

• Ball bearing supported design
• These clutches mount on a through-shaft, with the inner race driven by a key
• Formsprag Clutch® recommends the use of our HPI series for indexing rates in excess of 150 strokes per minute or indexing angles in excess of 90 deg

• Specification S... https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/Formsprag_Clutch_CL4026766_Specification_Sheet.pdf
• Instruction/Ins... https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/Formsprag_Clutch_CL408521302_Manual.pdf
• Catalog https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/Formsprag_Clutch_HSB7503000_Catalog.pdf