Timken®
RAL100NPPB

Timken® ball bearing housed units feature a wide-inner-ring ball bearing for additional shaft support. Designed for mounting on straight shafts with a slip fit, these housed units are available in an extensive array of types and sizes to accommodate many industrial applications. When set screws are used, Timken® suggests using shaftguarding Technology™, a stainless-steel, hardened band that is inserted in a groove on the inner ring. When the set screws are tightened, they press against the band, tightening the grip on the shaft. Unlike traditional set screws, which can dig into the shaft, there are no nicks, raised metal or permanent shaft damage. The stainless band resists the formation of corrosion on the shaft.

Timken®, RAL100NPPB, Ball Insert Bearing Housed Unit, Narrow Non-Relubricatable Light Duty, Series: RAL-NPPB, 1 in Bore, 1.85 in OD, 11/16 in Width, Double Seal Closure, 2260 lb Dynamic/1320 lb Static Load, Steel Bearing, Nylon Cage, 4860 rpm Maximum, Uncoated

• RAL series are high-quality, compact, low-cost bearings and are intended for use in lightly loaded applications
• RAL series are on extended inner-ring type with self-locking collars
• Pre-lubricated RAL series incorporate the positive-contact, land-riding R-seal
• The seal has proved effective in the retention of lubricants and exclusion of foreign matter under extreme service conditions
• This bearing is used in housings with corresponding spherical inside surfaces

• Catalog https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/Fafnir_1012KRRB_Catalog.pdf