Clesco
F2DC-BL-050

Flange Mount Bearings are bearing units contained inside a housing unit. The housing provides a rigid and secure position while allowing the bearing unit to rotate within a clean, contained environment. The housing is bolted to a foundation allowing the outer ring of the bearing to remain stationary while the inner ring rotates. Housed bearings are most commonly used in light duty applications.

Clesco Flange Mount Ball Bearing Unit, Rigid, Series: F2DC-BL, 1/2 in Bore, 2-1/2 in Bolt Center-to-Center Length, 2-Bolt Flange Mounting, 3-1/4 in Overall Length/Diameter, 1-1/16 in Overall Depth, 2 in Overall Height, Set Screw Locking Device, Neoprene Seal, 2152 lb Load, 6000 rpm Maximum, -30 to 200 deg F, Die Cast Zinc

• Well suited for applications requiring strong load support in limited mounting area
• Solid zinc die cast housing, is non-corrosive and lightweight and securely retains bearing by pressing the lip 360 deg over the outer race
• Ball bearing units include two setscrews used to secure the unit to the shaft for added load support
• 2152 lb dynamic/1075 lb static load capacity

• Catalog https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/Clesco_BSB_101216_Catalog.pdf
• Line Drawing https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/Clesco_F2DC_BL_050_Line_Drawing.pdf
• Specification S... https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/Clesco_F2DC_BL_050_Specification_Sheet.pdf
• Technical Bulle... https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/Clesco_BSB_101216_Technical_Bulletin.pdf