Browning®
1229707

Browning® offers a comprehensive line of off the shelf gears, including spur, miter and bevel as well as change gears. These are available in 20 deg pressure angle from 20 to 4 diametral pitch and 14.5 deg pressure angle from 48 to 3 diametral pitch. They are all designed to increase output, reduce costs and avoid the need for custom specials.

Browning® Spiral Miter Gear, Finished Bore Right Hand, 1-3/16 in Bore, 1:1 Gear Ratio, 28 Teeth, 8 Diametral Pitch, 3-1/2 in Pitch Diameter, 0.78 in Face Width, 2-1/2 in Diameter Hub, 1-1/4 in Hub Projection, 2-3/32 in Overall Length, 20 deg Pressure Angle, 1/4 x 1/8 in Keyway, Hardened Steel

• Bevel and miter gears develop axial thrust and adequate bearing support must be provided
• Adequate bearing support must be provided
• Miter gears must be run in sets of two or more gears with the same pitch, pressure angle and number of teeth
• Spiral bevel and miter gears have continuous pitch line contact and are smoother and quieter than straight tooth gears
• Spiral bevel and miter gears must be run in sets of mating gears with opposite hand spiral
• Used for transmission of power of motion between 90 deg intersecting shafts
• Spiral bevel and miter gears are hardened for longer life
• Hardened teeth

• Catalog https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/Browning_YSB20B1020_Catalog.pdf
• Warranty Inform... https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/Browning_A175382_Warranty.pdf