Fafnir®
TCJT1 7/16

Timken® ball bearing housed units feature a wide-inner-ring ball bearing for additional shaft support. Designed for mounting on straight shafts with a slip fit, these housed units are available in an extensive array of types and sizes to accommodate many industrial applications.

Timken® Fafnir®, TCJT1 7/16, Flange Mount Ball Bearing Unit, Industrial Normal Duty, Series: TCJT, 1-7/16 in Bore, 5-1/8 in Bolt Center-to-Center Length, 2-Bolt Flange Mounting, 6-1/8 in Overall Length/Diameter, 2.106 in Overall Depth, 2.106 in Overall Height, Eccentric Locking Device, Steel Bearing, 6400 lb Dynamic/3440 lb Static Load, 500 rpm Maximum, -30 to 275 deg F, Uncoated

• The cartridges are the same basic design as RCJ, TCJ, and LCJ types, except they have two bolt holes instead of four
• This series is primarily designed for applications where the mounting area is restricted
• The TCJT is equipped with G-KPPB (tri-ply seal) wide-inner-ring ball bearings
• The units are factory pre-lubricated

• Catalog https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/Fafnir_GVFD1_1_2_Catalog.pdf
• Specification S... https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/Fafnir_TCJT1_7_16_Specification_Sheet.pdf