Send NoImagePrint
  1. pin-int

Fafnir®
1012KLL

Fafnir® 1012KLL KLL Standard Duty Ball Insert Bearing Housed Unit With Locking Collar, 3/4 in Dia Bore, 1.85 in OD, 1 Rows, 1-11/32 in W, 3200 lb Dynamic/1400 lb Static Load

  • Manufacturer: Timken
  • Brand: Fafnir®
  • BSC Item#: 1012KLL FAF
  • MPN: 1012KLL
  • UPC: 087796054400
  • Min. Order Qty: 1
  • Qty. Interval: 1
  • Availability: Call for Availability

Timken® ball bearing housed units feature a wide-inner-ring ball bearing for additional shaft support. Designed for mounting on straight shafts with a slip fit, these housed units are available in an extensive array of types and sizes to accommodate many industrial applications. When set screws are used, Timken® suggests using shaftguarding Technology™, a stainless-steel, hardened band that is inserted in a groove on the inner ring. When the set screws are tightened, they press against the band, tightening the grip on the shaft. Unlike traditional set screws, which can dig into the shaft, there are no nicks, raised metal or permanent shaft damage. The stainless band resists the formation of corrosion on the shaft.

Fafnir® Ball Insert Bearing Housed Unit, Standard Duty, Series: KLL, 3/4 in Bore, 1.85 in OD, 1 Rows, 1-11/32 in Width, Double Seal Closure, 3200 lb Dynamic/1400 lb Static Load, Steel Bearing, Rubber Seal, Steel Cage, 10450 rpm Maximum, -30 to 275 deg F, Uncoated

Type      :      Standard Duty
Series      :      KLL
Bore Diameter      :      3/4 in
Outside Diameter      :      1.85 in
Number of Rows      :      1
Width      :      1-11/32 in
Closure Type      :      Double Seal
Load Capacity      :      3200 lb Dynamic/1400 lb Static
Bearing Material      :      Steel
Seal Material      :      Rubber
Cage Material      :      Steel
Maximum Speed      :      10450 rpm
Temperature Rating      :      -30 to 275 deg F
Finish      :      Uncoated
  • These eccentric wide-inner-ring ball bearings have either one or two mechanical-seals
  • These bearings are suitable for higher-speed and/or higher temperature applications
  • They incorporate non-contact seals, these bearings have very low rotational torque
  • KLL type are pre-lubricated at the factory and require no further lubrication
  • KLL series bearings have cylindrical outside diameters
  • pdfCatalog https://www.bsc-ind.com//ASSETS/DOCUMENTS/ITEMS/EN/Fafnir_KAK1_1_4_PS_Catalog.pdf
  • pdfSpecification Sheet https://www.bsc-ind.com//ASSETS/DOCUMENTS/ITEMS/EN/Fafnir_1012KLL_Specification_Sheet.pdf