Fafnir®
FLCT1 1/8

Timken® ball bearing housed units feature a wide-inner-ring ball bearing for additional shaft support. Designed for mounting on straight shafts with a slip fit, these housed units are available in an extensive array of types and sizes to accommodate many industrial applications.

Timken® Fafnir®, FLCT1 1/8, Flange Mount Ball Bearing Unit, Normal Duty Standard, Series: FLCT, 1-1/8 in Bore, 3-9/16 in Bolt Center-to-Center Length, 2-Bolt Flange Mounting, 4-7/16 in Overall Length/Diameter, 1-33/64 in Overall Depth, 1.534 in Overall Height, Eccentric Locking Device, Steel Bearing, 4370 lb Dynamic/2530 lb Static Load, 4570 rpm Maximum, -30 to 275 deg F, Uncoated

• These versatile power-transmission units are designed to provide sturdy shaft support in minimum space at minimum cost
• The space-saving, two bolt unit mounts flush against the frame
• The bolt-hole spacing and size is the same as the pressed-steel flangette unit
• The series is equipped with RA-RRB extended inner-ring ball bearings with positive-contact, land-riding seals
• The series is permanently pre-lubricated

• Catalog https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/Fafnir_GVFD1_1_2_Catalog.pdf