Timken®
RAK 1/2 NT

Timken® ball bearing housed units feature a wide-inner-ring ball bearing for additional shaft support. Designed for mounting on straight shafts with a slip fit, these housed units are available in an extensive array of types and sizes to accommodate many industrial applications.

Timken®, RAK 1/2 NT, Pillow Block Ball Bearing Unit, Normal Duty, Series: RAK, 1/2 in Bore, 3-5/8 in Bolt Center-to-Center Length, 1-1/16 in Base to Bore Centerline, 4-7/8 in Overall Length, 1-15/32 in Overall Width, 2-3/32 in Overall Height, Two-Bolt Base Mounting, Round Bore, 1-3/16 in Base Width, Eccentric Locking Device, Contact Seal, Non-Expansion (Fixed), 2150 lb Dynamic/1070 lb Static Load, 250 deg F, Cast Iron, Nickel Plated

• Heavier than our standard block with solid, flat feet for increased strength
• Compact, one-piece housing can be mounted in any position
• Pillow blocks self-align at mounting with the spherical outside diameter of the bearing fitting into the corresponding spherical housing seat
• Pre-lubricated and ready for immediate installation
• Grease fitting for relubrication
• All units are supplied with corrosion-resistant G-KRRB ball bearing and locking collar
• RAK pillow block is equipped with G-KRRB (R-seal) wide-inner-ring ball bearings

• Catalog https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/Timken_010_6015S_Catalog.pdf