Formsprag Clutch®
CL42156-83GR

FSO clutches are used on multi-speed, one direction only conveyors for non-destructive accommodation of speed differentials in powered rollers and belt drive systems. The FSO clutch allows the slower speed zone to over-speed during the transitional period without back driving the slower drive system. These clutches are available with FDA approved food grade greases and a variety of surface coatings required for wash down duty.

Formsprag Clutch® Formchrome® Sprag Clutch, Series: FSO-700, 2.937 in Bore, 7-1/4 in OD, 5 in Overall Length, 5000 ft-lb Torque, 1600 rpm Inner/450 rpm Outer Race Maximum, Vertical (Zero-U) Mounting

• Truly rebuildable to reduce long term operating cost
• Outer diameter of outer race is ground for use as a piloting or mounting surface for attaching parts
• Formsprag Clutch® recommends the use of our HPI series for indexing rates in excess of 150 strokes per minute or indexing angles in excess of 90 deg
• Grease lubrication

• Instruction/Ins... https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/Formsprag_Clutch_CL408521302_Manual.pdf
• Specification S... https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/Formsprag_Clutch_CL421891_Specification_Sheet.pdf
• Catalog https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/Formsprag_Clutch_HSB7503000_Catalog.pdf