Kaydon® Bearings
KG075AR0

Kaydon® Reali-Slim® bearings offer a wide variety of bearing solutions for even the most unique design challenges. Each Reali-Slim® ball bearing series is based on a single cross section which remains constant as the bore diameter is increased (in sharp contrast to standard bearings, in which the cross section increases as the bore diameter increases). By using the same series of Reali-Slim® bearings throughout a product line, the designer can standardize on common components.

Kaydon® Bearings Reali-Slim® Precision Thin Section Ball Bearing, Angular Contact Type A, Series: KG Series, 7-1/2 in Bore Dia, 9-1/2 in Outside Dia, 1 Row, 1 in W, Open Closure, 8303 lb Radial Dynamic/19420 lb Thrust Dynamic/16110 lb Radial Static/46510 lb Thrust Static, AISI 52100 Steel Bearing, Brass/Non-Metallic Composite Cage, -65 to 250 deg F

• The type A bearing is a conventional design
• It features a circular pocket separator and a 30 deg contact angle along with approximately 67% of a full complement of balls
• A deep-groove bearing with reduced shoulder on one side of inner or outer race ball path
• Snap-over assembly permits use of a one piece circular pocket ring separator and greater ball complement
• These bearings will accept radial load and single direction thrust load and are normally used in conjunction with another bearing of similar construction
• Type A bearings require the application of thrust to establish contact angle

• Catalog https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/Kaydon_Bearings_JA020CP0_Catalog.pdf