Kop-Flex® 2275337 H Series Type EB Finished Bore Gear Coupling, 2-7/8 in Flex/3-3/8 in Rigid Dia Bore, 7 in OD, 4-7/8 in OAL, 31500 in-lb Continuous/63000 in-lb Peak Torque, 9300 rpm Max
When driving and driven shafts are widely separated an unsupported or floating shaft is used to span the gap. The two couplings required at each end of that shaft consist of one half of a standard coupling bolted to a rigid hub, each unit called a flex-rigid coupling. Usually, the rigid hubs are mounted on the driving and driven shafts so that the flex halves on the floating shaft may be replaced without disturbing the connected equipment.
Kop-Flex® Gear Coupling, Type EB Finished Bore, Series: H Series, 2-7/8 in Flex/3-3/8 in Rigid Bore, 7 in OD, 4-7/8 in Overall Length, Flex/Rigid Hub, 4.813 in Dia Rigid Hub, 2.438 in Flex/2.281 in Rigid Length Through Bore, 31500 in-lb Continuous/63000 in-lb Peak Torque, 9300 rpm Maximum, 50 hp Power, 1/2 in Dia x 2-1/4 in L Bolt, 6 Bolts, -40 to 190 deg F
Application | : | Aggregate, Cement, Coal Power Generation, Cranes, Hoists, HVAC, Marine, Metals, Minerals, Mining, Pulp, Paper, Unit Handling, Water and Wastewater Industries |