SKF®
FYT 2.3/16 TF

Two-bolt cast iron flange units flange units support shafts through walls, bulkheads and other flat surfaces but have a more compact two-bolt design. F2BM medium duty housings accommodate a larger bearing for a given shaft size, resulting in a greater load carrying capacity. Both series are supplied with a grease fitting for relubrication and provide for initial bearing alignment.

SKF® Flanged Ball Bearing Unit, Standard-Duty Non-Expansion, Series: FYT, 2-3/16 in Bore, 7-1/4 in Bolt Center-to-Center Length, 2-Bolt Flange Mounting, 5.252 in Overall Length/Diameter, 2.614 in Overall Depth, 8-1/2 in Overall Height, Set Screw Locking Device, Cast Iron Bearing, NBR Seal, 9810 lb Dynamic/6530 lb Static Load, 3600 rpm Maximum, -40 to 210 deg F, Uncoated

• Prelubricated with a high quality, long life lithium/calcium grease
• Sphered housing bore mates with sphered O.D. of bearing, allows unit to accommodate for initial errors in alignment
• Designation permanently laser marked for easy identification of unit
• Grade #10 balls, ground and honed raceways for precision, quiet running and higher speed capacity
• Molded glass fiber reinforced polyamide cage for durability and quiet running
• Slotted bolt holes allow for a range of base bolt spacings and provide for adjustment at installation
• Solid housing provides a robust base with high break strength
• Set screw locking features two set screws 120 deg apart, this placement of the set screws maximizes holding power while minimizing inner ring distortion
• TF series units consists of the basic seal and a flinger mounted outboard, the flinger provides extra protection of the contact element
• Wide inner ring
• YAR series insert

• Catalog https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/SKF_SY_1_2_FM_Catalog.pdf