Morse®
172705

The B200 series clutch is designed with a full complement of cams retained in the outer race and requires bearing support, lubrication and sealing. The B200A clutch is primarily used for backstopping applications, such as a pump backstop application, but can be used for indexing or overrunning applications as well. The outer race diameter is the same as the metric 6200 series ball bearing to facilitate assembly adjacent to the ball bearing.

Morse® Cam Clutch, Series: B200, 1.841 in Bore, 3.148 in OD, 1-1/4 in Overall Length, 405 ft-lb Torque, 1800 rpm Maximum, Shaft Mounting

• Rugged cam clutch designed for applications where space and weight are factors in clutch selection
• Full complement of cams held in the outer races
• Input shaft used as the inner race must be hardened and ground to size
• Interchangeable with competitors product
• Clutches require bearing support to ensure concentricity between the inner outer races and taper on this shaft should not exceed 0.0002 per in
• Lubrication required
• Used in indexing and overrunning applications
• For freewheeling applications, the shaft that the clutch is mounted on should be the overrunning member
• No inner race (shaft is used as inner race)
• Primarily backstop applications and used in indexing and overrunning applications

• Catalog https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/Morse_086409_Catalog.pdf
• Instruction/Ins... https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/Morse_172700_Manual.pdf
• Specification S... https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/Morse_172700_Specification_Sheet.pdf