Browning®
1305101

Browning® shear pin hubs are designed to shear a necked pin at a predetermined load. This protects equipment from overloads. Consisting of a hub assembly, a sprocket and shear pin, the shear pin bridges between the sprocket and hub assembly. The shear pin is available in load increments, so the closest one to your application requirements must be chosen. Resetting the shear pin hub is accomplished manually by replacing the shear pin. Best applied to applications where infrequent overloads are encountered.

Browning® Stock Shear Pin, 7/32 in Diameter Neck, 1-5/8 in (SHQ1)/1-3/4 in (SHR1) OD, 9720 in-lb Torque, 100 rpm Maximum, 15 hp, For Use With: Model SHQ1/SHR1 Hub, Steel

• Sprocket rotates freely after pin breakage, allowing the drive to idle
• Universal mounting
• Single position
• Reversibility and repeatability
• Morse and Browning offer a complete line of Torque Overload Devices to protect machinery from overloads or jams
• Browning offers a complete set of replacement shear pins
• Shear pins are available in a wide range of minimum shear strength
• Browning shear pin hubs consist of 3 parts - steel sprockets, hub assembly, malleable bushing

• Instruction/Ins... https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/Browning_1305093_Installation_Manual.pdf