Boston Gear® 710-30-J 710-30-J BGW
Send NoImagePrint
  1. pin-int

Boston Gear®
710-30-J

Boston Gear® 710-30-J 700 Single Reduction Right Angle Helical Worm Gear Drive, No Flange Input, Solid Projecting Shaft Output, 0.2 hp Input/0.14 hp Output/0.17 hp Motor, 30:1 Gear Ratio, 58.3 rpm Maximum Output, 150 in-lb Torque Rating

  • Manufacturer: Altra Industrial Motion
  • Brand: Boston Gear®
  • BSC Item#: 710-30-J BGW
  • MPN: 710-30-J
  • UPC: 781711515990
  • Min. Order Qty: 1
  • Qty. Interval: 1
  • Availability: Call for Availability

Our standard 700 series, the heart of Boston Gear®'s speed reducer product line, has been serving industry reliably for over 40 years. Its proven modular design has set the industry standard for performance and is the most imitated product in today's worm gear speed reducer market. Its multi position mounting flexibility allows for installation in virtually any position, while internal baffles assure positive, leak free venting.

Boston Gear® Right Angle Helical Worm Gear Drive, Single Reduction, Series: 700, 30:1 Gear Ratio, 0.2 hp Input/0.14 hp Output/0.17 hp Motor, No Flange Input, Solid Projecting Shaft Output, 0.3745 in Input, 1/2 in Output, 58.3 rpm Output Maximum Speed, 1750 rpm Input Maximum Speed, 150 in-lb, 1 in Centre Distance, 0.69 % Efficiency, Klubersynth UH1 6-460 Lubrication, No Base Mount, Cast Iron, Standard Gray Painted, 4.5 in L x 4.53 in W x 3.63 in H

Type      :      Single Reduction
Series      :      700
Gear Ratio      :      30:1
Horsepower      :      0.2 hp Input/0.14 hp Output/0.17 hp Motor
Input Type      :      No Flange
Output Type      :      Solid Projecting Shaft
Input Size      :      0.3745 in
Output Size      :      1/2 in
Output Maximum Speed      :      58.3 rpm
Input Maximum Speed      :      1750 rpm
Torque Rating      :      150 in-lb
Centre Distance      :      1 in
Efficiency      :      0.69 %
Lubrication Type      :      Klubersynth UH1 6-460
Mounting Type      :      No Base
Material      :      Cast Iron
Finish      :      Standard Gray Painted
Dimensions      :      4.5 in L x 4.53 in W x 3.63 in H
  • Precision ground worm threads maximize gearbox efficiency
  • At low ratio efficiencies of 90 to 95% are common
  • The 700 series large oil reservoir provides efficient heat dissipation and lubrication for longer operating life
  • Its multi position mounting flexibility allows for installation in virtually any position
  • Housings are straddle milled, top and bottom for precise alignment of horizontal and vertical bases
  • Internal baffles assure positive and leak free venting
  • The 700 series rugged housing, fabricated of fine grained, gear quality cast iron, provides maximum strength for maximum durability, as well as greater precision during worm and gear alignment
  • Boston Gear®'s 700 series high strength bronze worm gear is straddle mounted between heavy duty tapered roller bearings to increase thrust and overhung load capacities
  • Our 700 series high strength steel output shaft assures capacity for high torque and overhung loads
  • Pipe plugs allow easy fill, level and drain in any mounting position
  • The 700 series super finished oil seal diameters on both input and output shafts extend seal life
  • Standard oil seal
  • pdf Catalog https://www.bsc-ind.com//ASSETS/DOCUMENTS/ITEMS/EN/Boston_Gear_71050H_Catalog.pdf
  • pdf Instruction/Ins... https://www.bsc-ind.com//ASSETS/DOCUMENTS/ITEMS/EN/Boston_Gear_71020J_Manual.pdf
  • pdf Specification S... https://www.bsc-ind.com//ASSETS/DOCUMENTS/ITEMS/EN/Boston_Gear_71010G_Specification_Sheet.pdf
Standard/Approvals      :      AGMA Class I|PROP65: This product contains lead, known to the State of California to cause cancer and birth defects or other reproductive harm.
Application      :      Use with hoist applications