Browning®
1021674

MVP® sheaves are a series of angular faced center flanges which are bolted to the fixed flange mounted on the barrel. They also contain another series of angular faced flanges which are bolted to the end flange and threaded locking collar. When the threaded locking collar is turned clockwise, it moves the angular flanges closer together increasing the pitch diameter. When the collar is moved counterclockwise, the flanges are moved apart, decreasing the pitch diameter. The pitch diameter is infinite. This means the collar adjustment can be turned and stopped at any time regardless of location between the minimum and the maximum setting. When the desired diameter is obtained, the locking collar is locked by tightening screws. In contrast VL, VP, and VM sheaves are limited by half- turn or 180 deg adjustment points.

Browning® Companion Sheave, Type 15 Arm, Series: MVP®, Bushed Bore, 1-1/8 to 3-3/4 in Bore, 11.35 in OD, 10.8 in (A)/11.3 in (B) Pitch Diameter, 4 Grooves, 4-3/8 in Face Width, R1 Bushing, 4-3/8 in Overall Length, For Use With: GripBelt® A and B Cross Section V-Belt, Cast Iron

• Large selection MVP® companion sheaves are offered in A/B, C, 5V and 8V belt sections and from 3 to 10 grooves giving Browning® the largest selection of MVP® companion sheaves in the industry
• VP sheaves consist of a male with a threaded barrel, and a female with a threaded bore
• The male section with threaded barrel has flat surfaces at 180 deg increments that allow a flat surface for the setscrew to mate with
• When discs are moved toward each other, the belt rides higher in the groove and the pitch diameter of the sheave is larger which increases the driven speed
• Browning 358 Notched Belts are constructed of EPDM material wrapped top and botttom, increased operating temperature range of -60F to 250F degrees
• More horsepower in less space - Browning 358 Belts provide more horsepower in the same span than conventional ABC Belts
• This enables you to reduce drive cost
• Close Belt tolerance - Browning Belts offer the Code 1 in Match belt system on all classical and 358 in Belts, allowing easy selection of just one match number for each belt size
• Statically Balanced - All MVP companion sheaves are statically balanced to assure smooth, vibration free performance

• Instruction/Ins... https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/Browning_1004910_Installation_Manual.pdf
• Warranty Inform... https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/Browning_A175382_Warranty.pdf