Tsubaki®
TSBSB30

TSBSB shock relay series-overload protection has built-in reset button, test button, fail-safe contacts with manual and automatic reset feature. TSBSB shock relay senses the problem before downtime, maintenance and equipment damage occur, saving you time and money. Install it on a line, set the overload parameters and shock relay takes care of the rest. If an overload is detected, the shock relay can send a warning or shut down the line-quick and reliably. Correct the problem and you're up and running again in minutes.

Tsubaki® Shock Relay, All-In One Electronic, Series: TSBSB, 3 to 30 A, 2 W Power, 50/60 Hz Frequency, 24 to 240 VAC/VDC Coil, 1NC-1NO Contact Form, 250 VAC Contact, 35 mm DIN Rail Mounting, IP20 Enclosure, -4 to 140 deg F, 3.04 in L x 2.2 in W x 2.63 in H Dimensions

• Output relay is self-holding type
• Contacts open when an overload is detected and remain until the reset button is pushed
• Fail-safe relay de-energizes when over current detected
• Economically priced
• Wide current setting range
• High degree of repeatability with low hysteresis
• Includes test and reset buttons
• All-in-one unit with built-in current transformer
• Can be used with single-phased motors
• Permits trip notification by alarm or warning lights

• Catalog https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/Tsubaki_TSBSB05_Catalog.pdf
• Instruction/Ins... https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/Tsubaki_TSBSB05_Manual.pdf
• Specification S... https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/Tsubaki_TSBSB30_Specification_Sheet.pdf