Sealmaster®
710569

Sealmaster® gold mounted ball bearings feature a wide outer race insert bearing with land riding metallic retainer. The black oxide treated bearing steel insert features an exclusive lock pin and dimple system providing a direct path for lubrication into the bearing, and prevents outer ring rotation within the housing. Shaft lock is achieved by either setscrew or Skwezloc® concentric locking collar. The felt seal with flinger provide a good balance between contaminant entry, GoldPlex® HP grease loss and friction. Depending on your preference, these bearings are available in both inch and metric shaft sizes with a wide variety of cast iron, stamped steel or rubber mount housings, sealing, and lubrication options or industry specific solutions.

Sealmaster® Pillow Block Ball Bearing Unit, Medium Duty, Series: MP Series, 75 mm Bore, 200 to 257.2 mm Bolt Center-to-Center Length, 88.9 mm Base to Bore Centerline, 330.2 mm Overall Length, 82.6 mm Overall Width, 184.2 mm Overall Height, Two-Bolt Base Mounting, Round Bore, 88.9 mm Base Width, Set Screw Locking Device, Contact Seal, Non-Expansion (Fixed) Expansion, 77449 N Dynamic Load, 250 deg F, 1950 rpm Maximum, Cast Iron, Uncoated

• Metal nameplate riveted to the housing allows for easy identification even after years of operation
• High temperature synthetic grease
• Alemite fitting lubrication
• Powder coated epoxy cast iron housing with extended inner ring bearings
• Zone hardened inner ring with 120 deg spacing setscrew locking with diamond faceted setscrews
• Unique land riding retainer design provides superior pocket clearance that allows for 360 deg grease circulation around the rolling elements resulting in better retained and utilized lubrication
• Sealmaster exclusive lock pin and dimple for direct lubrication and anti-rotation

• Instruction/Ins... https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/Sealmaster_700171_Installation_Manual.pdf
• Specification S... https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/Sealmaster_701889_Specification_Sheet.pdf