Fafnir®
TCJ1 1/2

Timken® ball bearing housed units feature a wide-inner-ring ball bearing for additional shaft support. Designed for mounting on straight shafts with a slip fit, these housed units are available in an extensive array of types and sizes to accommodate many industrial applications.

Timken® Fafnir®, TCJ1 1/2, Flange Mount Ball Bearing Unit, Industrial Normal Duty, Series: TCJ, 1-1/2 in Bore, 4 in Bolt Center-to-Center Length, 4-Bolt Flange Mounting, 5-1/8 in Overall Length/Diameter, 2.334 in Overall Depth, 2.334 in Overall Height, Eccentric Locking Device, Steel Bearing, 8130 lb Dynamic00000000001/3970 lb Static Load, 500 rpm Maximum, -30 to 275 deg F, Uncoated

• Timken® cartridges are used in applications where a minimum amount of machining is to be done
• Each unit comes assembled and ready for mounting, with bolts through the flange
• These are wide-inner-ring ball bearings, self-aligning B-types, which compensate for shaft misalignment
• The TCJ is equipped with G-KPPB (tri-ply seal) wide-inner-ring ball bearings
• The TCJ flange cartridges are identical to RCJ units, except they use the tri-ply seal bearing
• Tri-ply units offer the best protection in dirty environments
• The units are factory pre-lubricated
• The units are supplied with self-locking collars

• Catalog https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/Fafnir_GVFD1_1_2_Catalog.pdf
• Specification S... https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/Fafnir_TCJ1_1_2_Specification_Sheet.pdf