Timken®
RAK 5/8

Timken® ball bearing housed units feature a wide-inner-ring ball bearing for additional shaft support. Designed for mounting on straight shafts with a slip fit, these housed units are available in an extensive array of types and sizes to accommodate many industrial applications.

Timken®, RAK 5/8, Pillow Block Ball Bearing Unit, Normal Duty, Series: RAK, 5/8 in Bore, 3.626 in Bolt Center-to-Center Length, 1.063 in Base to Bore Centerline, 4.874 in Overall Length, 1-15/32 in Overall Width, 2.094 in Overall Height, Two-Bolt Base Mounting, Round Bore, 1.189 in Base Width, Eccentric Locking Device, Shroud Seal, Non-Expansion (Fixed), 2150 lb Dynamic/1070 lb Static Load, 250 deg F, 7370 rpm Maximum, Cast Iron, Uncoated

• Heavier than our standard block with solid, flat feet for increased strength
• Compact, one-piece housing can be mounted in any position
• Pillow blocks self-align at mounting with the spherical outside diameter of the bearing fitting into the corresponding spherical housing seat
• Pre-lubricated and ready for immediate installation
• Grease fitting for relubrication
• All units are supplied with self-locking collar
• RAK pillow block is equipped with G-KRRB (R-seal) wide-inner-ring ball bearings

• Catalog https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/Timken_010_6015S_Catalog.pdf
• Specification S... https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/Timken_RAK_5_8_Specification_Sheet.pdf