Browning®
1295153

Browning® Torq/Gard® overload clutches are one of the most popular torque overload devices that power transmission solutions offers. A spring loaded cam follower seated in a single hub cam detent cause the hub and clutch to rotate together. Therefore the clutch always resets in the same position if tripped, staying in phase. They can be turned in both directions by design. After tripping, the unit automatically resets when it returns to the set position. This is usually performed by jogging the machine after the jam or overload is cleared. Shaft bushings are used to accommodate a standard maximum bore unit to the application shaft requirement. Torque capacity up to 8000 in-lb and speed ranges from 350-1800 rpm.

Browning® Torq/Gard® Overload Clutch, Mini, Series: TGC, 1-1/4 in Bore Dia, 5-1/4 in Outside Dia, 3-1/2 in Overall Length, 200 to 600 in-lb

• Help protect the entire drive train of your machinery from damage due to excessive torque generated by overloads and jamming
• Instant reaction and automatic reset by "jogging" the machine provides unsurpassed protection and minimizes down time
• Disengages at the pre-set torque limit
• Precise overload protection with an elegant yet rugged cam-in-detent system
• Detector plates, coupling options and other accessories enhance design flexibility
• Sealed for life gasket and O-ring sealed body, packed with high-performance, moisture resistant, lithium based grease for outdoor and wash-down application
• International-orange finish is a durable bright orange enamel finish for high visibility and easy identification of rotating components
• 900 rpm
• 8.5 hp

• Catalog https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/Morse_1296342_Catalog.pdf
• Instruction/Ins... https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/Browning_3547007_Manual.pdf