Timken®
RAK2

Timken® ball bearing housed units feature a wide-inner-ring ball bearing for additional shaft support. Designed for mounting on straight shafts with a slip fit, these housed units are available in an extensive array of types and sizes to accommodate many industrial applications.

Timken®, RAK2, Pillow Block Ball Bearing Unit, Normal Duty, Series: RAK, 2 in Bore, 6-15/16 in Bolt Center-to-Center Length, 2-7/16 in Base to Bore Centerline, 8-3/4 in Overall Length, 2-13/16 in Overall Width, 4-29/32 in Overall Height, Two-Bolt Base Mounting, Round Bore, 2-3/8 in Base Width, Eccentric Locking Device, Contact Seal, Non-Expansion (Fixed), 9750 lb Dynamic/6570 lb Static Load, 250 deg F, 2710 rpm Maximum, Cast Iron, Uncoated

• Heavier than our standard block with solid, flat feet for increased strength
• Compact, one-piece housing can be mounted in any position
• Pillow blocks self-align at mounting with the spherical outside diameter of the bearing fitting into the corresponding spherical housing seat
• Pre-lubricated and ready for immediate installation
• Grease fitting for relubrication
• All units are supplied with self-locking collar
• RAK pillow block is equipped with G-KRRB (R-seal) wide-inner-ring ball bearings

• Catalog https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/Timken_010_6015S_Catalog.pdf