Send NoImagePrint
  1. pin-int

Kop-Flex®
1040T10

Kop-Flex® KOP-GRID® 2282218 1000 Horizontal Split Cover Tapered Grid Coupling, 1-5/8 in Dia Bore, 4.62 in OD, 4.12 in OAL, 2000 in-lb Torque, 4500 rpm Max

  • Manufacturer: Regal Beloit
  • Brand: Kop-Flex®
  • BSC Item#: 1040T10 KOPFLEX
  • MPN: 2282218
  • UPC: 662384770711
  • Min. Order Qty: 1
  • Qty. Interval: 1
  • Availability: Call for Availability

The grid design functions as a resilient coupling by damping torsional vibration and cushioning shock loads. This results in reduced vibration at the output end of the coupling. Peak loading is reduced, for smooth torque transmission, to help protect connected equipment from potentially damaging vibratory loads. A second function of the grid design is that it can act much like a protective overload shear device. During an extreme overload, the grid can shear, reducing the possibility of damage to expensive machinery and equipment. The outer edges of the grid contact the hub tapered teeth for light loads. This leaves a long span to bear the load variations while still compensating for misalignment. The grid is free to flex and dampen shock loads, even as the load increases. The span between the support ends shortens with increasing load. However, the grid is still free to flex, cushion shock and compensate for misalignment. The KOP-GRID® coupling, when under extreme loads, transmits the full load directly to driven equipment with the entire grid in full contact with the hub tapered teeth. The coupling is flexible within its rated capacity. Movement of the grid in the hub grooves accommodates parallel misalignment while dampening shock and vibration. The grid/groove design permits a rocking and sliding action. This occurs without loss of power through the resilient grid. End float is permitted for both driving and driven shafts because the grid slides freely in the lubricated grooves.

Kop-Flex® KOP-GRID® Tapered Grid Coupling, Horizontal Split Cover, Series: 1000, 1-5/8 in Bore, 4.62 in OD, 4.12 in Overall Length, 2-1/4 in Hub, 2 in Length Through Bore, 2000 in-lb Torque, 4500 rpm Maximum, 3.22 hp Power, 300 deg F

Type      :      Horizontal Split Cover
Series      :      1000
Bore Diameter      :      1-5/8 in
Outside Diameter      :      4.62 in
Overall Length      :      4.12 in
Hub Size      :      2-1/4 in
Length Through Bore      :      2 in
Torque Rating      :      2000 in-lb
Maximum Speed      :      4500 rpm
Power Rating      :      3.22 hp
Temperature Rating      :      300 deg F
  • Fully interchangeable by component with other tapered grid couplings
  • Grids act much like a protective overload shear device during overloads to protect expensive, connected equipment
  • Quick and easy installation with low maintenance
  • Easy assembly in confined spaces
  • Torsionally flexible
  • Suitable for reversing service
  • 1040 coupling size