FISKE™ Evap Oil, 5 gal, Pail, 30.5 SUS at 100 deg F Viscosity, Liquid, Composition: 30 to 60% Hydrotreated Heavy Naphtha, 30 to 60% Heavy Alkylate Naphtha, Mild, 129.2 deg F Flash
- Formulated to meet industry's need for a light duty stamping and forming oil that will evaporate after use, eliminating the need for a subsequent cleaning operation
- Lubricates like mineral oil
- Non-staining to all metals
- Evaporates within 1 hr exposure to air
- Does not affect painted surfaces
- No residual odor or oil (suitable for painting afterward)
- Contains no sulfur or chlorine
- Meets the FDA requirements of a material that may be used as a surface lubricant in the manufacture of metallic articles that contact food
-
SDS
https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/FISKE_F0524060_SDS.pdf
-
Specification S...
https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/FISKE_F0524060_Specification_Sheet.pdf
Standard/Approvals |
: |
FDA Approved|OSHA Standard 29 CFR 1910.1200 |
Application |
: |
Stamping Aluminum, Galvanized Steel, Tinplate, Copper, Brass, Terneplate, Pre-Painted Steel, Spray, Brush, Dip, Wipe-On and Felt Pads |