FISKE™ Stamping Oil, Series: 7 Series, 5 gal, Pail, 31 SUS at 100 deg F Viscosity, Liquid, Composition: 60 to 100% Heavy Alkylate Naphtha, Mild, >129 deg F Flash
- A light duty stamping and forming oil that will largely evaporate after use, usually eliminating the need for a subsequent cleaning operation
- Low viscosity organic lubricating fluid
- Compounded for enhanced wetting ability
- Lubricates like mineral oil
- Non-staining to all metals
- Evaporates after use leaves slight oily film that is hardly noticeable
- Does not affect painted surfaces
- Contains no sulfur or chlorine
- Meets the FDA requirements of a material that may be used as a surface lubricant in the manufacture of metallic articles that contact food
-
SDS
https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/FISKE_F0560060_SDS.pdf
-
Specification S...
https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/FISKE_F0560060_Specification_Sheet.pdf
Standard/Approvals |
: |
FDA Approved|OSHA Standard 29 CFR 1910.1200 |
Application |
: |
Stamping Aluminum, Galvanized Steel, Tinplate, Copper, Brass, Terneplate, Pre-Painted Steel, Spray, Brush, Dip, Wipe-On and Felt Pads |