Send NoImagePrint
  1. pin-int

Thomson®
2DA0800AL24

Thomson® RoundRail™ 2DA0800AL24 Continuously Supported Linear Guide, 1/2 in Dia Nominal, 24 in L Linear Guide, 20-1/2 in L Stroke

  • Manufacturer: Thomson Industries
  • Brand: Thomson®
  • BSC Item#: 2DA0800AL24 THOM
  • MPN: 2DA0800AL24
  • Min. Order Qty: 1
  • Qty. Interval: 1
  • Availability: Call for Availability

The RoundRail™ advantage, the inherent self-aligning-in-all-directions design, allows for ultra smooth travel when mounted on wider tolerance prepared surfaces. The self-aligning design of the Super Smart Ball Bushing® bearings allow for more deviation in the flatness of the mounting surface which can dramatically reduce the installed cost of the linear guide. Additionally, this performance proven linear guide is available in corrosion resistant options including chrome plated or stainless steel shafting and corrosion resistant bearings.

Thomson® RoundRail™ Linear Guide, Continuously Supported, Series: 2DA, 1/2 in Diameter Nominal, 24 in Linear Guide Length, 20-1/2 in Stroke Length, DSRA End Support, 480 lb Dynamic Load, 0.28 in Mounting Hole, Black Anodized Aluminum Alloy Support, 4.6 in W x 1.625 in H Dimensions

Type      :      Continuously Supported
Series      :      2DA
Nominal Diameter      :      1/2 in
Linear Guide Length      :      24 in
Stroke Length      :      20-1/2 in
End Support Type      :      DSRA
Load Capacity      :      480 lb Dynamic
Mounting Hole Size      :      0.28 in
Support Material      :      Black Anodized Aluminum Alloy
Dimensions      :      4.6 in W x 1.625 in H
  • Low profile, high loads in all directions and easy to install
  • This performance proven linear guide has an extremely low profile and features external rails with maximum bearing spacing
  • This provides the user with high pitch, yaw and roll moment capability, the load capacity is the same when mounted in the inverted position
  • The inherent self-aligning design of the Super Smart Ball Bushing® bearings allow for more deviation in the flatness of the mounting surface, this can dramatically reduce the installed cost of the linear guide
  • The base extrusion has a reference edge for registration in your machine, unlimited travel lengths can be realized by combining base and shaft segments
  • The shafts and bases are staggered to allow keying of the subsequent stage
  • For continuously supported applications when rigidity is required
  • Adaptable to any drive system
  • Dual shaft rail fully supported system with integrated carriage
  • Narrow style carriage
  • Pre-aligned and preassembled for immediate use
  • Designed for medium to heavy loads