FAG
21314-E1-XL-C3

Spherical roller bearings are a special rolling bearing design whose inner ring runs inside the outer ring on two rows of rollers. The bearings have an angular adjustment of up to 2 deg and are not only designed for high load carrying capacity but can also compensate misalignments.

FAG Spherical Roller Bearing, Cylindrical Bore, Series: 213-E1, 70 mm Bore, 150 mm OD, 2 Rows, 35 mm Width, Open Closure, 270 kN Load, Sheet Steel Cage, 6200 rpm Maximum, -30 to 200 deg C

• Spherical roller bearings are suitable where rearing arrangements are subjected to high and very high radial loads
• Relatively high axial loads occur on one or both sides, in addition to high radial forces
• Dynamic or static misalignments of the shaft relative to the housing, or deflections of the shaft, must be freely compensated by the bearing
• High shock type loads must be supported dynamically
• Locating bearings with a very high load carrying capacity are required
• Two sheet steel cages, surface hardened or coated, guidance on outer ring
• X-life design
• C3 radial internal clearance
• Without central rib on inner ring
• 250 kN dynamic/270 kN static

• Catalog https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/FAG_22317E1XL_Catalog.pdf