Festo Guided Drive, Basic Version, Series: DFM, 50 mm Cylinder Bore, 125 mm Stroke Length, 1178 N Advance/1057 N Return Maximum Force, Double Acting Cylinder Action, 229 N Maximum Load, G1/4 Port, 1 to 10 bar, -20 to 80 deg C, Wrought Aluminum Alloy, Anodized, 118 mm L x 148 mm W x 64 mm H
- Drive and guide unit in a single housing
- Minimal space requirement and assembly time
- Sturdy and precise
- Good protection against torsion
- High rigidity, maintenance-free
- High resistance to torques and lateral forces
- High alloy stainless steel non corrosive piston rod
- High rigidity thanks to large diameter guide rods and four plain-bearing bushes
- Position sensing via proximity sensor
- Flexible elastic cushioning rings/pads at both ends
-
Catalog
https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/Festo_170849_Catalog.pdf
-
Instruction/Ins...
https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/Festo_170849_Manual.pdf
-
Line Drawing
https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/Festo_170875_Line_Drawing.pdf
-
Specification S...
https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/Festo_170875_Specification_Sheet.pdf
-
Technical Bulle...
https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/Festo_14320_Technical_Bulletin.pdf
Application |
: |
For use in conveyor systems |