Browning®
1096577

Browning® Gearbelt® Synchronous Belt, Type L, 76 Teeth, 3/8 in Pitch, 28-1/2 in Overall Length, 3/4 in Width, 180 deg F, Neoprene, Fiberglass Reinforced Material, Black

• Constant speed no slip, no creep, minimum backlash, because of the positive grip of the belt teeth with pulley grooves
• High modulus strength member - needs minimum take-up
• Freedom from initial belt tension - reduces bearing loads, increases life
• Compact design Gearbelt® belts permit smaller pulleys, shorter centers, narrow belts
• Lightweight high horsepower to weight ratio makes Gearbelt® drives ideal for any application where weight is an important factor
• Less heat because Gearbelt® drives generate virtually no friction
• No lubrication required
• Gearbelt® drives are offered in five stock pitches to handle a wide range of loads
• Molded teeth shear resistance teeth designed to provide smooth positive engagement with Gearbelt® pulleys
• High tensile cord specially treated cords to provide strength and additional flex life while providing resistance to elongation for the belt
• Compression section bonds to belt cords for protections against dirt, grease, oil, ozone, and other environmental hazards
• Dual timing belts Browning® offers a full line of dual timing belts which can provide 100% load capacity from either side
• Combination Groove - All Browning B5V Sheaves permit the running of A, 4L, B, 5L and 5V Belts to be run in them, thus providing a variety of different pitch diameters and horsepowers
• Broad horsepower coverage - The B5V is available in 1 through 6 grooves allowing it to cover from 5 to 125 horsepower drives
• Incorporates Browning Split Taper Bushing - The only bushing system that provides a true Key-to-Key drive to both the shaft and the hub
• New Casting design - The B5V castings were developed using CAD and Finite Elements Analysis to determine where to add and eliminate material

• Instruction/Ins... https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/Browning_1004910_Installation_Manual.pdf