FAG
NUP222-E-XL-M1-C3

Cylindrical roller bearings of type NUP have two rigid ribs on the outer ring as well as one rigid rib and one loose rib washer on the inner ring. With these cylindrical roller bearings, axial displacements between the shaft and the housing are not possible. Bearings of type NUP are used as locating bearings, i.e. they can guide the shaft axially in both directions.

FAG Cylindrical Roller Bearing, Separable, Series: NUP2-E, 110 mm Bore, 200 mm OD, 1 Rows, 38 mm Width, 365000 N Load, Solid Brass Cage, 4100 rpm Maximum, -30 to 150 deg C

• Bearing arrangements are subjected to very high radial loads
• Not only high radial forces but also axial loads from one or both directions must be supported by the bearing position
• Bearing arrangements must have very high rigidity
• High radial loads and very high speeds occur but the very high radial load carrying capacity of full complement cylindrical roller bearings is not required
• Locating bearing function
• Increased capacity design
• X-life design
• Solid brass cage, two-piece, roller-guided
• C3 radial internal clearance
• 345000 N dynamic/365000 N static