Timken®
RAK1 3/4

Timken® ball bearing housed units feature a wide-inner-ring ball bearing for additional shaft support. Designed for mounting on straight shafts with a slip fit, these housed units are available in an extensive array of types and sizes to accommodate many industrial applications.

Timken®, RAK1 3/4, Pillow Block Ball Bearing Unit, Normal Duty, Series: RAK, 1-3/4 in Bore, 5.88 in Bolt Center-to-Center Length, 2.063 in Base to Bore Centerline, 7.531 in Overall Length, 2-7/32 in Overall Width, 4.126 in Overall Height, Two-Bolt Base Mounting, Round Bore, 2.063 in Base Width, Eccentric Locking Device, Shroud Seal, Non-Expansion (Fixed), 7350 lb Dynamic/4600 lb Static Load, 250 deg F, 3230 rpm Maximum, Cast Iron, Uncoated

• Heavier than our standard block with solid, flat feet for increased strength
• Compact, one-piece housing can be mounted in any position
• Pillow blocks self-align at mounting with the spherical outside diameter of the bearing fitting into the corresponding spherical housing seat
• Pre-lubricated and ready for immediate installation
• Grease fitting for relubrication
• All units are supplied with self-locking collar
• RAK pillow block is equipped with G-KRRB (R-seal) wide-inner-ring ball bearings

• Catalog https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/Timken_010_6015S_Catalog.pdf
• Specification S... https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/Timken_RAK1_3_4_Specification_Sheet.pdf