Timken®
YAK1 3/4 SGT

Timken® ball bearing housed units feature a wide-inner-ring ball bearing for additional shaft support. Designed for mounting on straight shafts with a slip fit, these housed units are available in an extensive array of types and sizes to accommodate many industrial applications.

Timken®, YAK1 3/4 SGT, Pillow Block Ball Bearing Unit, Normal Duty, Series: YAK, 1-3/4 in Bore, 5.874 in Bolt Center-to-Center Length, 2.063 in Base to Bore Centerline, 7.531 in Overall Length, 1-15/16 in Overall Width, 4.126 in Overall Height, Two-Bolt Base Mounting, Round Bore, 2.063 in Base Width, Set Screw Locking Device, Shroud Seal, Non-Expansion (Fixed), 7350 lb Dynamic/4600 lb Static Load, 250 deg F, 3230 rpm Maximum, Cast Iron, Uncoated

• Incorporates shaft guarding technology, which reduces replacement time, provides shaft protection and prolongs the life of the shaft
• Heavier than our standard block with solid, flat feet for increased strength
• Timken® series low-base set screw pillow blocks feature the GY-KRRB bearing
• Well-suited for industrial applications with normal loads due to its full-width inner-ring set screw
• All units are supplied with setscrew and shaft guarding technology

• Catalog https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/Timken_010_6015S_Catalog.pdf
• Specification S... https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/Timken_YAK1_3_4_SGT_Specification_Sheet.pdf