Fafnir®
YCJ1 1/2 SGT

Timken® ball bearing housed units feature a wide-inner-ring ball bearing for additional shaft support. Designed for mounting on straight shafts with a slip fit, these housed units are available in an extensive array of types and sizes to accommodate many industrial applications.

Timken® Fafnir®, YCJ1 1/2 SGT, Flange Mount Ball Bearing Unit, Industrial Normal Duty, Series: YCJ, 1-1/2 in Bore, 4 in Bolt Center-to-Center Length, 4-Bolt Flange Mounting, 5-1/8 in Overall Length/Diameter, 2.141 in Overall Depth, 2.141 in Overall Height, Set Screw Locking Device, Steel Bearing, 8130 lb Dynamic00000000001/4460 lb Static Load, 3500 rpm Maximum, -30 to 275 deg F, Uncoated

• Incorporates shaft guarding technology, which reduces replacement time, provides shaft protection and prolongs the life of the shaft
• The same basic design as the RCJ series, except specially designed set screws are used as the locking device instead of an eccentric collar
• All units are equipped with GY-KRRB wide-inner-ring set screw bearings
• Spherical outside diameter of the bearings mounted in the corresponding machined housing seats provides the initial self-alignment
• Bolt-hole spacing dimensions are interchangeable with the RCJ series and most competitive units
• The units are factory pre-lubricated

• Catalog https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/Fafnir_GVFD1_1_2_Catalog.pdf
• Specification S... https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/Fafnir_YCJ1_1_2_SGT_Specification_Sheet.pdf